-
destaelectricals@yahoo.co.in -
+91-9643209013, +91-9643209011, +91-9910900398 - Send SMS
- Send Email
- GST No. 09AWFPS6912E1ZC
40 KVA Three Phase Servo Voltage Stabilizer
Leading Manufacturers, Exporters, Wholesaler and Retailer of D30040 40 KVA Three Phase Servo Voltage Stabilizer and D32040 40 KVA Three Phase Servo Voltage Stabilizer from Mathura.
| Business Type | Manufacturer, Exporter, Supplier, Retailer, Wholesaler |
| Input Voltage | As Per Customer Requirement |
| Power | 40 KVA |
| Output Voltage | 230/240 Volts. ± 1% Nominal. Front panel Adjustment with in ± 5% of Nominal Voltage |
| Warranty | 1 Year |
| Display Type | Digital |
| Production Capacity | 30 Pcs./ Month |
| Output Cutoff | Low / High Voltage Cuttoff |
| Mounting Type | Indoor Floor Mount |
| Efficiency | >95% |
| Is It ISO Certified | ISO Certified |
| Brand | DESTA |
| Phase | Three Phase |
| Is It Over Volt Protection | Available |
| Number Of Wheels | 4 Wheels |
| Current Type | AC |
| Reference Standard | IS-9815, IS-2026 |
| Visual Indications | Input, Output, Low/High Voltage, Time Delay, Mains ON, Low/High Voltage Cutoff |
| Nature of Cooling | Air Cooled / Oil Cooled |
| Response Time | 10 m sec |
| Control | Through Micro Controlled Digital Circuit |
| Wave form Distortion | Nil |
| Auto/ Manual Operation | Provided |
| Dielectric Test | 1.5 KV RMS for 1 minute for the unit 2.5KV for the Power components |
| Insulation Resistance | <6 Mega Ohms at 500V DC |
| Ambient | -10 to 50 deg. C RH 95% |
| Environment | Designed for Indoor Tropical Use |
| Compatibility | Use with Mains and DG set |
| Suitability | Unbalance Input Voltage, Balance Output Voltage, & Balance/ Unbalance Load |
| Correction Rate | 15-25 volts/ Sec |
| Input/Output Connection | Terminals of suitable rating |
| Product Code | D30040 |
| Delivery Time | 3 to 5 Days |
Preferred Buyer From
| Location | Worldwide |
Details
- Basic components of Servo voltage stabilizer are:
- Buck boost double wound transformer.
- Suitable toroidal wound variac.
- Geared servo motor unit with limit switches to avoid over running at highest and lowest position.
- Microcontroller Digital display control card.
- These entire components are interconnected to form Servo Voltage Stabilizer.
Salient Features
- Wave Shape distortion-nil.
- 95% and more efficiency being achieved by optimum design and by use of high quality CRGO lamination and 99.9% pure copper.
- Immune to load PF and supply frequency variation.
- Power losses 2% maximum.
- Duty cycle continuous.
- Life expectancy 15-20 yrs.
- Operation-Auto/Manual.
- Control through Micro Processor Controller/IC based solid state plug in type glass epoxy control Card.
- High quality EHV grade oil as per IS-335.
- Refezence Standard IS-9815, IS-2026.
| Business Type | Manufacturer, Exporter, Supplier, Retailer, Wholesaler |
| Type | Automatic, Manual |
| Power | 40 kva |
| Input Voltage | 320 - 470 Volts. |
| Output Voltage | 400 Voltage +- 1 % |
| Phase | Three Phase |
| Production Capacity | 10 PCS. / Week |
| Frequency | 50Hz |
| Capacity | 40 KVA |
| Efficiency | > 95% |
| Speed | 15 to 25 Volts. / Sec. |
| Display Type | Digital |
| Brand | DESTA |
| Reference Standard | IS-9815, IS-2026 |
| Control | Through Micro Controlled Digital Circuit |
| Response Time | 10 m sec |
| Nature of Cooling | Air Cooled / Oil Cooled |
| Visual Indications | Input, Output, Low/High Voltage, Time Delay, Mains ON, Low/High Voltage Cutoff |
| Wave form Distortion | Nil |
| Auto/ Manual Operation | Provided |
| Dielectric Test | 1.5 KV RMS for 1 minute for the unit 2.5KV for the Power components |
| Insulation Resistance | <6 Mega Ohms at 500V DC |
| Ambient | -10 to 50 deg. C RH 95% |
| Environment | Designed for Indoor Tropical Use |
| Compatibility | Use with Mains and Dg Set |
| Suitability | Unbalance Input Voltage, Balance Output Voltage & Balance/ Unbalance Load |
| Correction Rate | 15-25 volts/ Sec |
| Product Code | D32040 |
| Delivery Time | 3 to 5 Days |
Preferred Buyer From
| Location | Worldwide |
Details
- Basic components of Servo voltage stabilizer are:
- Buck boost double wound transformer.
- Suitable toroidal wound variac.
- Geared servo motor unit with limit switches to avoid over running at highest and lowest position.
- Microcontroller Digital display control card.
- These entire components are interconnected to form Servo Voltage Stabilizer.
Salient Features
- Wave Shape distortion-nil.
- 95% and more efficiency being achieved by optimum design and by use of high quality CRGO lamination and 99.9% pure copper.
- Immune to load PF and supply frequency variation.
- Power losses 2% maximum.
- Duty cycle continuous.
- Life expectancy 15-20 yrs.
- Operation-Auto/Manual.
- Control through Micro Processor Controller/IC based solid state plug in type glass epoxy control Card.
- High quality EHV grade oil as per IS-335.
- Reference Standard IS-9815, IS-2026.
